Drawings

The following table highlights which user permissions are required to perform the described user action.

: Indicates an action supported in Procore's iOS and/or Android mobile application.

Task	Read Only	Standard	Admin
Add a Drawing Area
Add a Link to a Drawing
Add Photos to a Drawing	¹	¹	¹
Add Punch List Items to a Drawing
Allow Users To Delete Published Markups
Change a Drawing Version's Number
Compare Drawing Revisions
Configure Advanced Settings: Drawings
Configure Default Drawing Disciplines
Create a Drawing Set	+	+
Delete a Drawing Area
Delete a Drawing Set
Delete Drawing Markups (personal)
Delete Drawing Markups (published)		²
Delete Drawings
Delete Pending Drawings
Download Drawings
Edit a Drawing Area Name
Edit a Drawing Set
Edit Drawings
Email Drawings
Enable or Disable Drawing Areas
Export the Drawings Log to a PDF or CSV
Filter Drawing Markups
Generate and Print QR Codes
Link to Related Items on a Drawing
Manage Drawing Log
Mark Drawings as Obsolete
Mark Up a Drawing (personal)
Mark Up a Drawing (published)
Open a Drawing
Print Drawings
Publish Drawings
Publish Personal Drawing Markups
Reorder Drawings
Review and Confirm Drawings	+	+
Search For and Filter Drawings
Subscribe to the Drawings Log			³
Unsubscribe from the Drawings Log			³
Upload a Drawing Sketch
Upload Drawing Revisions	+	+
Upload Drawings	+	+
View the All Drawing Sets and Revisions Report
View the All Sketches Report
View the Measurements Report for Drawings	⁴	⁴	⁴
View the Deleted Drawings Revision Report
View Sketches
View Drawings
View Markup Activity Feed

¹Users must also have 'Read Only' or higher permissions on the project's Photos tool.

²Users with 'Standard' level permissions on the Drawings tool can delete published drawing markups if the 'Allow Standard level users to delete published markup' setting is enabled for the project. See Allow Users To Delete Published Markups.

³Only users with 'Admin' permissions can subscribe or unsubscribe other users to the Drawings tool.

⁴Users can only see their own measurements that they have added to drawings using the measurement markup tools. See Add Measurements to a Drawing.